Material Safety Data Sheet
Section 1-Chemical Product and Company ldentification
Trade Name: Fridge Magnet Souvenire
Article number: N/A
Manufacture/Supplier:
DONG GUAN SHANLI CRAFTS INDUSTRY CO.LTD
Section 2-Composition/Data on componentChemical characterization
Description: Mixture of the substance listed below with nonhazardous additions.
Section 3-Hazards ldentification
Hazard description:
Information pertaining to particular dangers for man and environment.The product has to be labeled due to the calculation procedure of international guidelineIrritate in contact with skin, eyes.
Classification system:
The classilfication was made according to the latest editions of international substances lists, and expanded upon from
Trade name: Fridge Magnet Souvenir
Section 4-First Aid Measures
Trade Name: custom acrylic magnets
General information:
lmmediately remove any clothing soiled by the product. After inhalation: In case of unconsciousness p1ace patient stably in side position for transportationAfter skin contact: immediately wash with water and soap and rinse (horoughly.<After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.After swallowing:ifsymptoms persist consult doctor
Section 5_Fire Fighting easures<Suitable extinguishing agents: CO2, sand, extinguishing powder. Do not use water.For safety reasons unsuitable extinguishing agents: Water with full jetProtective equipment: Wear fully protective suit
Section 6-Accidental Relea9e Measures
Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.Measures for environmental protection: Do not allow product to reach sewage system or any water course.<Inform respective authorities in case of seepage into water course or sewage system.Do not allow to enter sewers/ surface or ground water,<Measures for cleaning/collecting:<
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Dispose contaminated material as waste according to Section 13,<Ensure adequate ventilation,<
Do not flush with water or aqueous cleansing agents.
Additional information: See Section 7 for information on safe handling.
Section7-Handling and Storage
Trade Name:refrigerator magnets custom
Handiing:
Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.←
Information about protection against explosions and fires:
Keep ignition sources away.
Protect aqainst electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles:<Store in a cool location. The temperature should be above 0’CInformation about storage in one common storage facility:
Store sway from foodstuffs.
Store away from gammable substances.
Further information about storage conditions:
keep receptacle tightly sealed.←
Store in cool, dry conditions in well sealed receptacles.
Section 8-Exposure Controls and Personal Protection
White mineral oil:
5 mg/m3-ACGIH TLV, 10 mg/m3-ACGIH STEL
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the cyes and skin. Breathing equipment:
Tn case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that ts independent of circulating air.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical mixture.
Selection of the glove n aterial on ccnsi‹Iei atioii of the Ue neiration times rates oï diflrision aiid the degraclatioil Material of gloves
1”he selection of the sriitable gloves does not only depend on the n aterial, Dut also on f\irther marks of qriality and varies h om nJanufactui el to nJanufactrirer As lhe pi oduct is a pi eparation of several SLiôstances, lh resistance of the glove material can not be calcr‹lated in advance and has theiefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to ôe fotind ont by the manufacturer of the protective gIoves and has to De observed. Eye protection:
Tightly seaied goggles
![]()
Section 9 — Physica I and Chemical Properties
Trade Name:fridge magnets suppliers
General Information
Form: Liquid Color: Transparent Odor: Odor less
Change in condition
Melting point/Melting range: No applicable Boiling point/Boiling range: No a¡JpIicable Flash point: 135 C
Flammability (solid, gaseous): Now-flammable
Ignition temperature: 140“C Auto ignîting: No at›plicahle
Danger of explosion. For z›ntion of e xt›Iosive air/vapoi” iJiiXtLires is irnpos sihle. E xplosiorj limits:
Lower: 0.”I
Upper: 7,U
Oxidizing properties: Net applicable
Vapor pressure: < 0 013 kPa (0 1 mm Hg) at 20°’C Derzsity: 0.815g/ml
Relative density: NOt applicable
Viscosity: 3 25
Evaporation rate: Not applicable
Solubility in / Miscibility with Water: Can not soluble in water
pH-value: Not available
Section 10 — Chemical Stability and Reactivity Information
Thermal decompos itian / conditions to be avoided: No ‹IeconJposition if used accorJi‹ g to specifications Materials to be avoided: Strong oxidizing agents, strong acicl and s(rong bnse
Dangerous reacttons: No r4aiJgeruLis reactions known
Dangerous products of decom position: CO, CO2, nitrogen oxides if exposure to high temperature
Section 11 — Toxicological Information
No data
Section 12 — Ecological Information
Additional ecological information: General notes:
Water hazafd class 0 (Self-assessment} no hazardous for water
Do not allow product to reach grorin0 water. water course or sewage system. Danger Io d‹i›king water if even small quantities leak into Ihe grorincl
Section 13 – Disposal Considerations
Product: ‘,
Trade Name:customized magnets for fridge
Recommendation:
Must not be disposed of together with household garbage. Do nOt allow product to reach sewage system. Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
Section 14 — Transportation Information
DOT regulations:
Hazard class: N/A Identification nurn ber: N/A Packing group: N/A
Proper shipping naive (technical name): N/A
– Label –
Section 15 – Regulatory Information
<<InternationaI Maritime Dangerous Goods» OSHA Hazards
TSCA Status DSL Status
SARA 302/311/312/313
In accordance with all Federal, State and Local laws Product related hazard information:
– Hazard symbols:
N/A
Risk phrases:
Irritate to skin, eyes.
- Safety phrases:
Keep out of the reach of children.
Keep container tightly closed and in a well-ventilated place.
Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. if swallowed, seek medical advice immediately and show this container or label.
Section 16 – Other Information
The contents and format of this MSDS/SDS are tn accordance with 29 CFR 1910.1200(g) DlSCLAlMEft OF LIABILITY
The information in this MSDS/SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in anyway connected with the handling, storage, use or disposal of the product. This MSDS/SDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS/SDS information may not be applicable.